Let's Get Your CUVR On!

Congratulations on Your New CUVR!

Welcome to the CUVR family! Your illuminated display is ready to transform your space into a personal music gallery. Watch our setup video above to get started in minutes, and don't forget to explore the digital experience for exclusive content about your album.

Access Your Digital Experience

Sit Your CUVR on a Shelf

Quick Shelf Setup Guide

Transform any shelf or flat surface into a gallery display in under 60 seconds! Simply attach the two screw-in legs to the back of your CUVR, place it on your desired surface, and plug in the power. The built-in kickstand design ensures perfect viewing angle while keeping your display stable and secure.

Read The Instructions

Step 1

Unpack Your CUVR

Carefully remove your CUVR from the packaging. Locate the two screw-in legs in the accessory compartment.

Step 2

Attach the Legs

Turn your CUVR face-down on a soft surface. Screw both legs into the designated mounting points on the back panel. Hand-tighten only.

Step 3

Position on Shelf

Place your CUVR on your desired shelf or flat surface. The angled legs provide the perfect viewing angle automatically.

Step 4

Connect Power

Connect the power cable to your CUVR and plug into a wall outlet. Use the included cable grips to keep wiring tidy.

Step 5

Light It Up!

Use the RF remote to turn on your CUVR and adjust brightness to your preference. Enjoy your illuminated album art!

Hang Your CUVR on the Wall

Wall Mounting Made Simple

Create a stunning gallery wall with your CUVR display! Choose between our nail-in premium wall hanger for permanent installation or the peel-and-stick option for damage-free mounting. The included rubber spacers ensure your CUVR floats elegantly off the wall while cable grips keep everything clean and professional.

Read The Instructions

Step 1

Choose Your Location

Select a wall location at eye level (typically 57-60 inches from floor to center). Ensure access to a nearby power outlet.

Step 2

Select Mounting Method

Choose between nail-in hanger (for drywall/wood) or peel-and-stick hanger (for smooth surfaces). Both support the full weight of your CUVR.

Step 3

Install Wall Hanger

For nail-in: Hammer at 45° angle. For peel-and-stick: Clean wall surface, remove backing, press firmly for 30 seconds.

Step 4

Attach Rubber Spacers

Stick the two rubber spacers to the back of your CUVR (bottom corners). These create a floating effect and protect your wall.

Step 5

Hang Your CUVR

Carefully hang your CUVR on the wall mount. Connect power cable and use the included cable grips to route wiring along the wall.

Step 6

Perfect Your Display

Level your CUVR, arrange cable grips for clean cable management, and power on. Use the remote to set your preferred brightness!